NitroFlare DriveDx 1.4.1 build 490 (Mac OSX)

Discussion in 'Mac and Other OSs' started by kocogi, Oct 9, 2015.

  1. kocogi

    kocogi Active Member

    May 29, 2012
    Likes Received:
    Trophy Points:

    DriveDx 1.4.1 build 490 | MacOSX | 22.6 MB
    DriveDx is advanced drive-health diagnostic and monitoring utility. Save yourself from data loss and downtime that is associated with unexpected drive failures. Don't worry about losing your important data, music, and photographs.

    Advanced Drive Health Diagnostics
    Regular diagnostic tools simply check the built-in S.M.A.R.T. status of the drive, which provides the user with little information about the actual state of the physical drive. As opposed to such tools, DriveDx analyzes the current state of the drive using all the drive health indicators that are most likely to point to a potential drive issue (for instance, SSD wear out / write endurance, I/O errors, pending sectors, reallocated bad sectors, etc).

    Drive Failing (Pre-fail) State Detection
    Unlike most other tools, DriveDx detects not only "OK/Verified" and "Failed" drive health states, but also the "Failing (Pre-fail)" drive state. Thanks to that, you will detect problems much earlier than when using any other SMART monitoring utilities. This means that you have more chances to save your critical data before any data loss actually occurs.

    Real-time Drive Health Monitoring
    DriveDx runs in the background and periodically performs checks to determine the health of your SSD or HDD. When any issue or problem is found, it alerts you immediately. DriveDx acts as an "early warning system" for pending drive problems. As a result, you have more chances to save your critical data before any data loss actually occurs.

    Early Warning System
    DriveDx features a special multi-tier warning system that will inform the user about deviations from the normal state of drive attributes. It constantly monitors each S.M.A.R.T. attribute (and its change dynamics) and starts continuously warning the user as the drive degrades. On the initial stages of drive degradation, the user will receive notifications of the Warning type, then Failing (means that this drive parameter is in a pre-failure state) and only then Failed.

    Drive Self-tests
    DriveDx allows you to start and control diagnostic self-tests of SSD / HDD. The primary goal is to quickly identify if the drive is faulty. Usually self-tests consist of a collection of test routines like electrical and/or mechanical performance tests as well as the read performance test of the drive. Depending on self-test type it does read scan of a small area or the entire media.

    Modern SSDs and HDDs Support
    When evaluating the state of various drives, DriveDx can use different heuristic algorithms depending on the drive model and even its firmware version. One of the key advantages of the software is that the state of HDD and SSD drives is assessed using different algorithms, since many state indicators of HDD drives are not applicable or make no sense for SSD drives.

    Automatic E-mail Reports
    The user can get problem notifications and drive status reports to email. Reporting can be configured on the basis of various criteria. Thanks to this feature, the user does not need to have physical access to a specific computer all the time, which is especially useful for all kinds of server rooms, data centers, etc.

    A modern, good-looking and user-friendly interface
    DriveDx is one of the first drive diagnostic tools created in the true Mac style. All interface elements are clear and intuitive, so it will only take you a few minutes to learn the basics and start using the program. When a problem is identified, you will see a notification on the desktop and the status bar will show the status of your drives.

    Drive Key Metrics Evaluation
    DriveDx calculates various ratings of the current status of key drive characteristics (percent values):
    - Drive health rating
    - Drive performance rating
    - SSD lifetime left indicator (in case of an SSD drive)

    Drive Free Space Monitoring
    (Mac OSX) and applications might fail due to an inability to allocate storage space. In addition, low disk space might cause disk fragmentation. To avoid data loss and to ensure the continuous functioning of your computer it is important to monitor the amount of available storage space on your drive. DriveDx can automatically monitor free disk space and will alert user immediately if user defined free space threshold exceeded.

    - Support of modern SSDs and HDDs
    - SSD lifetime left indicator
    - Different routines for SSD and HDD health evaluation
    - Real-time SSD & HDD health status monitoring
    - User friendly and intuitive UI
    - Pre-failure state early detection - DriveDx supports 4 drive health statuses: Ok, Warning, Failing (pre-failure) and Failed. (Most of drive utilities support only 2: "Ok" and "Failed")
    - Drive failure prediction based on health indicators that are closely related to SSD or HDD failures
    - Interactive hints and descriptions for all health indicators (SMART attributes)
    - Multi-tier warning system that will inform the user about deviations from the normal state of drive attributes
    - Diagnostic Knowledge Base online auto-updating
    - Drive overall health rating
    - Drive overall performance rating (if drive supports this subset of indicators)
    - I/O errors monitoring
    - Drive free space monitoring
    - Support of drive short and full (extended) self-tests
    - Save drive(s) health report to file
    - Automatic drive health reports by email (automatic email reports)
    - Human-readable drive health indicators (attributes) representation
    - Drive temperature monitoring
    - History-based drive health evaluation
    - S.M.A.R.T. error log
    - Growl notifications
    - Retina displays support

    What's New Version 1.4.1:
    OS X 10.11 El Capitan support & Fixes
    Added better support of OS X El Capitan (10.11)
    Added support of external drives (diagnostic) on OS X El Capitan (10.11). Learn more
    Improved support of recent SSDs and HDDs
    Added many many stability improvements
    Added many cosmetics tweaks and fixes
    Fixed system freeze/hangup on some Macs

    Requirements: Intel, OS X 10.6.8 or later

    Buy Premium From My Links To Get Resumable Support,Max Speed & Support Me
    Download ( NitroFlare )

Share This Page