Nuance Dragon Naturally Speaking v10.1 PREF

Discussion in 'Archive' started by HULK., May 11, 2011.

  1. HULK.

    HULK. Guest

    [​IMG]

    1)
    Disconnect from the network/internet.

    2)
    Explore/open disk and copy the folder "Key-Act" to your desktop.

    3)
    Open the folder and minimize, you will use the folder thru out the installation process.

    [​IMG]

    [​IMG]

    4)
    Install using the supplied KeyMaker,inside the folder called "Key-Act".
    (Keep the keygen open during the whole install process)

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Open KeyGen,at the top is a drop down arrow. Select Nuance Dragon Naturally Speaking v10.x

    [​IMG]

    5)
    Hit "Generate Serial"
    Enter serial and click next
    Click install,in "setup type" you can typical or custom.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    DO NOT HAVE ANY PART OF THE PROGRAM RUNNING DURING THE REGISTER.BAT OPTION

    6)
    Close Register Today, do not activate, Uncheck, check for updates

    7)
    Inside the "Key-Act" folder you will find register.bat
    Copy/paste register.bat to your installation folder most often it will be in
    C:\Program Files\Nuance\NaturallySpeaking10\Program
    or w/e you installed the program.

    [​IMG]

    [​IMG]

    [​IMG]

    8)
    Double click register.bat
    A CMD window will open as will another box called "Enter key"

    [​IMG]

    9)
    Take the Hardware ID, from the "Enter key" box, and Paste it into the keygen under Hardware ID

    [​IMG]

    [​IMG]

    For the serial number, click "generate Serial" again, you will need to hand type the serial number
    from the Key Gen, into the serial number field on the "Enter key" box.
    If you try to copy paste it will always fill in the key box for some reason.

    Try to generate a key that dosen't have a bunch of "0(ZEROS)" and "O"

    [​IMG]

    10)
    Use the KeyMaker to generate a valid Authentication Code, click generate a authentication code,
    copy that long number into the "Enter key" box in the key section.
    Click "ok"

    [​IMG]

    [​IMG]

    11)
    Copy and paste the serial number to "notepad"
    because the key number doesn't always take on the first shot.

    You may have to enter a new Authentication Code a few times,

    I had to do it 5 time

    If it fails you have to re-enter the Serial and the key
    Remember, if you have to re-enter the key do not copy/paste it.

    [​IMG]

    [​IMG]

    PATCH FILES
    Code:
    http://www.filesonic.com/file/964509991/Nuance_KeyMaker.rar

    PROGRAM FILES DOWNLOAD
    Code:
    http://www.filesonic.com/file/964887381/Dragon_Naturally_Speaking_10_.Preferred.rar
     
  2. HULK.

    HULK. Guest

    reupload
     
  3. jarkov

    jarkov Guest

    i downloaded this and it has zip 1 2 4 5 6 7 but no number 3 zip in the folder can someone fix please thank you
     
  4. CixTürk

    CixTürk Guest

    this is an amazing movie! Thanks for sharing, man!
     
  5. Gamex

    Gamex Guest

    thanks bro... wanted to see this!
     
  6. Danielz34

    Danielz34 Guest

    Thanks a lot bro , good a sharing...
     
  7. RootX

    RootX Guest

    Sharing a very successful. Thank you.
     
  8. RootX

    RootX Guest

    Sharing a very successful. Thank you.
     
  9. p2000

    p2000 Guest

    oh so goood my friend
    thanks alot...
     
  10. Astranout

    Astranout Guest

    Shares a very good quality, thank you.
     
  11. justlooken

    justlooken Guest

    Thank You So freaking much you are the bomb. You have no idea how much this has come in handy.
     
  12. AyazBrohi

    AyazBrohi Guest

    thanks a lot
     
  13. ilikeposting

    ilikeposting Guest

    Thanks for this share.Downloading it.
     

Share This Page