Windows 7 (Seven) Ultimate Edition 32/64-bit ACTiVATED

Discussion in 'Archive' started by pedraki, Oct 25, 2009.

  1. pedraki

    pedraki Guest

    Microsoft Windows 7 (Seven) Ultimate Edition

    32/64-bit ACTiVATED

    Reupload Counter= 12

    With "how to install" guide | Untouched files | Bootable |


    Credit Goes to Its Maker faXcooLi"?1/2

    Microsofti"?1/2 Windowsi"?1/2 7 (Seven) Ultimate Edition (x86/x64) ACTiVATED

    - Type : Operated system.
    - Release date : 22. October 2009.
    - Status : i"?1/2i"[email protected]"?1/2Ki"?1/2D
    - Platforms : x86-32, x64-64, EM64T.
    - Version : x86/32-bit | x64/64-bit.
    - Build : 7600 RTM (Final).
    - Service Pack : Not available at the moment.
    - Licence type : OEM.
    - Activation : Not required.
    - Serial : Not required.
    - Language : English.
    - Creator : faXcooL
    - Re-Uploader : Vaspar
    - Download and extract using WinRAR.
    - Use NERO to burn the ISO image called "faXcooL.Windows.7.Ultimate.ENG.x86-x64.ACTiVATED"
    - Burning speed should not be faster than 4x. Otherwise, it might not work.
    - Restart your computer.
    - Make sure you've seleceted your DVD-ROM/RW drive as a first boot device
    * Enter the BIOS pressing the DEL button, set the option, insert your Windows 7 installation

    and restart computer.
    - The black screen will appear (image 01).
    - Press any key to boot from CD or DVD.... (by pressing the key you're entering the setup)
    - Select your language, time and currency and keyboard input (optionaly)
    - Click install now
    - Choose your edition (x86 is 32-bit, x64 is 64-bit) depending of CPU type you have.
    *Choose x64 if you have 64-bit processor.
    - Click "I accept".
    - Click "Custom (advanced).
    - Choose your partition/hdd drive where Win7 should be installed and click format.
    *You might get some error if you have two or more hard disks with different connectors (ATA

    and SATA).
    If you get an error, turn off one of your hard disks and repeat the whole proces.
    - After formatting, setup will continue automaticly and it will finish after 15-30 min.
    - Next step would be username (Image 17).
    - Type your password (if you want).
    - When you get the screen for CD-KEY just ignore it leaving blank.
    *Uncheck the box for automaticly activation and click next.
    - Choose the third option for next step.
    - Select your time zone.
    - Select your current location (Home is recommended).
    - The black CMD windows will appear. Wait a few seconds until computers restares once again.
    - And that would be all about installation. You're in Windows now.


    - It's not required, because it's OEM. Windows will be premanently activated.
    However, it's well known that there is some problems with DELL and HP machines.
    So if you have issues with pre-activation you'll be forced to some activator to activate

    Windows 7.
    Nothing has been removed from the original ISO files. It's

    completely untouched. The only thing that I modifyed is setup so that you can choose which

    version you like to install, whether it be 32-bit or 64 bit.

    Activator Highlights
    - This activator works with all versions.
    - Tested and working on both x86 and x64.
    - Works in Virtual Environment.
    - Works with dual-boot
    - No key is needed for install or activation.
    - The activation adds the OEM master key for you.
    - "OEM" Brand is left up to end-user.
    - No BIOS modification needed.
    - It has no text during boot. (Vista activators had this)
    - Uses OEM SLP method.
    - Supports SLIC and non-SLIC enabled BIOS.
    - Emulate a SLIC 2.1 enabled BIOS on a PC without SLIC 2.1 present...
    - User friendly.
    - Interface has a G.U.I for interaction.
    Installation Tips
    - It is recommended to do a clean install of Windows 7 but not necessary as it has tested to work with upgrades as well.
    - You must remove all modifications made by previous 7Loaders and Orbit30 Win7 Tool Kit (1.8 toolkit was for pre-RTM).
    - Disable "UAC" to be safe.
    1. Run the '7Loader' on your Windows Partition
    2. Select your desired "OEM" Brand
    3. Wait for the pop-up to appear
    4. Click "Install 7Loader"
    5. Wait for the pop-up to appear
    6. Press "OK" and PC will reboot once complete
    Special Notations
    - If you have a modded BIOS, instead of clicking "Install 7Loader".. you can just use the "SLIC 2.1 in BIOS" to install the certificate & key to activate without having to use the loader.
    Other Notes
    - This activator has been put to the test by me & friends!
    - Tested on clean installs.
    - Tested on upgrades.
    - Tested on all versions.
    - Tested on both x86 / x64 Systems.
    - Passed with flying colors !

    1. Its My Own Upload but not my Own Version.
    2. Recovery Record is Included
    3. Same Requirements as Windows 7's
    4. It took my whole day (24 hours) to Upload as my uploading speed sucks (50 KB/s now)
    5. It will Take only 5 Seconds maximum to Say Thanks so please don't be a Leecher and Say Thanks
  2. aidencade

    aidencade Guest

    Beeen trying to get this.. Need it for a system..
  3. mahesz

    mahesz New Member

    Aug 15, 2012
    Likes Received:
    Trophy Points:
    thanx much!!!
  4. tntintl1

    tntintl1 Guest

  5. Ladybbird

    Ladybbird Guest

    Oh I do hope this works, I have downloaded so many false links. Thank you for this, does it not need a password as some I have downloaded needed one and it wasn't provided.
  6. lilhacker

    lilhacker Guest

    Thanks alot downloading now, if it works your the best,

    will post if works or not
  7. Oribaba

    Oribaba Guest

    The links are working... Good. Thanks in advance. Let download it first. Is there any password protection?
  8. sdmkncxvvy

    sdmkncxvvy Guest

    Thanks for this....:heyo:
  9. conaz1

    conaz1 Guest

    Thanx a lot
  10. aasnj9473x

    aasnj9473x Guest

    thanks mate
  11. Ladybbird

    Ladybbird Guest

    These links wont work, saying source cannot be found
  12. ScouseGit

    ScouseGit Guest

    Thanks for the share :good:
  13. NorkCralCoabe

    NorkCralCoabe New Member

    Nov 7, 2012
    Likes Received:
    Trophy Points:
    Downloading now All links working for me. Update Burnt to disk. All looks good. I install in the next day or two. Thanks Man for this great download :girl_cray2::girl_cray2::girl_cray2:
  14. smokcs

    smokcs Guest

  15. rsole

    rsole Guest

    Great Post...Thanks Pedraki :)
  16. Yder2dedrma

    Yder2dedrma Guest

    Thanks pedraki for your hard work! It is very much appreciated!!! :heyo:

    Here's hoping it works & continues to do so. Who of us can afford to pay for Windows 7 (especially four copies)! :tomato2:
  17. buslin

    buslin Guest

    Thankyou much appreciated
  18. dave454

    dave454 Guest

    thank you for the hard work
    as of today all links still working

  19. vietnamese

    vietnamese Guest

    Thanks so much for sharýng : Great post !!!

Share This Page