Windows 7 (Seven) Ultimate Edition 32/64-bit ACTiVATED

Discussion in 'Archive' started by pedraki, Oct 27, 2009.

  1. pedraki

    pedraki Guest

    Microsoft Windows 7 (Seven) Ultimate Edition

    32/64-bit ACTiVATED

    Reupload Counter= 12

    With "how to install" guide | Untouched files | Bootable |


    Credit Goes to Its Maker faXcooLi"?1/2

    Microsofti"?1/2 Windowsi"?1/2 7 (Seven) Ultimate Edition (x86/x64) ACTiVATED

    - Type : Operated system.
    - Release date : 22. October 2009.
    - Status : i"?1/2i"[email protected]"?1/2Ki"?1/2D
    - Platforms : x86-32, x64-64, EM64T.
    - Version : x86/32-bit | x64/64-bit.
    - Build : 7600 RTM (Final).
    - Service Pack : Not available at the moment.
    - Licence type : OEM.
    - Activation : Not required.
    - Serial : Not required.
    - Language : English.
    - Creator : faXcooL
    - Re-Uploader : Vaspar
    - Download and extract using WinRAR.
    - Use NERO to burn the ISO image called "faXcooL.Windows.7.Ultimate.ENG.x86-x64.ACTiVATED"
    - Burning speed should not be faster than 4x. Otherwise, it might not work.
    - Restart your computer.
    - Make sure you've seleceted your DVD-ROM/RW drive as a first boot device
    * Enter the BIOS pressing the DEL button, set the option, insert your Windows 7 installation

    and restart computer.
    - The black screen will appear (image 01).
    - Press any key to boot from CD or DVD.... (by pressing the key you're entering the setup)
    - Select your language, time and currency and keyboard input (optionaly)
    - Click install now
    - Choose your edition (x86 is 32-bit, x64 is 64-bit) depending of CPU type you have.
    *Choose x64 if you have 64-bit processor.
    - Click "I accept".
    - Click "Custom (advanced).
    - Choose your partition/hdd drive where Win7 should be installed and click format.
    *You might get some error if you have two or more hard disks with different connectors (ATA

    and SATA).
    If you get an error, turn off one of your hard disks and repeat the whole proces.
    - After formatting, setup will continue automaticly and it will finish after 15-30 min.
    - Next step would be username (Image 17).
    - Type your password (if you want).
    - When you get the screen for CD-KEY just ignore it leaving blank.
    *Uncheck the box for automaticly activation and click next.
    - Choose the third option for next step.
    - Select your time zone.
    - Select your current location (Home is recommended).
    - The black CMD windows will appear. Wait a few seconds until computers restares once again.
    - And that would be all about installation. You're in Windows now.


    - It's not required, because it's OEM. Windows will be premanently activated.
    However, it's well known that there is some problems with DELL and HP machines.
    So if you have issues with pre-activation you'll be forced to some activator to activate

    Windows 7.

    Nothing has been removed from the original ISO files. It's

    completely untouched. The only thing that I modifyed is setup so that you can choose which

    version you like to install, whether it be 32-bit or 64 bit.
    Activator Highlights
    - This activator works with all versions.
    - Tested and working on both x86 and x64.
    - Works in Virtual Environment.
    - Works with dual-boot
    - No key is needed for install or activation.
    - The activation adds the OEM master key for you.
    - "OEM" Brand is left up to end-user.
    - No BIOS modification needed.
    - It has no text during boot. (Vista activators had this)
    - Uses OEM SLP method.
    - Supports SLIC and non-SLIC enabled BIOS.
    - Emulate a SLIC 2.1 enabled BIOS on a PC without SLIC 2.1 present...
    - User friendly.
    - Interface has a G.U.I for interaction.
    Installation Tips
    - It is recommended to do a clean install of Windows 7 but not necessary as it has tested to work with upgrades as well.
    - You must remove all modifications made by previous 7Loaders and Orbit30 Win7 Tool Kit (1.8 toolkit was for pre-RTM).
    - Disable "UAC" to be safe.
    1. Run the '7Loader' on your Windows Partition
    2. Select your desired "OEM" Brand
    3. Wait for the pop-up to appear
    4. Click "Install 7Loader"
    5. Wait for the pop-up to appear
    6. Press "OK" and PC will reboot once complete
    Special Notations
    - If you have a modded BIOS, instead of clicking "Install 7Loader".. you can just use the "SLIC 2.1 in BIOS" to install the certificate & key to activate without having to use the loader.
    Other Notes
    - This activator has been put to the test by me & friends!
    - Tested on clean installs.
    - Tested on upgrades.
    - Tested on all versions.
    - Tested on both x86 / x64 Systems.
    - Passed with flying colors !

    1. Its My Own Upload but not my Own Version.
    2. Recovery Record is Included
    3. Same Requirements as Windows 7's
    4. It took my whole day (24 hours) to Upload as my uploading speed sucks (50 KB/s now)
    5. It will Take only 5 Seconds maximum to Say Thanks so please don't be a Leecher and Say Thanks
  2. rowly

    rowly Guest

    THANK YOU!!!!!! :heyo:
  3. rowly

    rowly Guest

    THANK YOU!!!!! :heyo:
  4. madmarcus

    madmarcus Guest

    Thank you sooooooo much!!!! I have been waiting on this since word first hit about it.
  5. madmarcus

    madmarcus Guest

    hmmmm, didnt show my thank you post from before, so I am posting another just in case. Thanks a bunch!
  6. burnik

    burnik Guest

    thank you for sharing
  7. Blox1969

    Blox1969 Guest

    Thank you!!!
  8. Ladybbird

    Ladybbird Guest

    Thank you pedraki, my internet is so bad that I have downloaded so many links for this and they are blocked before I get to finish. Lets hope these are good.
  9. Maxisco_13

    Maxisco_13 Guest

    thnks m8
  10. isakhan74

    isakhan74 Guest

    thank you brother
  11. tntintl1

    tntintl1 Guest

  12. ovreg

    ovreg Guest

    Thank you
  13. Anayaaja101

    Anayaaja101 New Member

    May 15, 2014
    Likes Received:
    Trophy Points:
    Home Page:
    Thanks a lot for a great work !!!!
  14. godaka

    godaka Guest

  15. boy2000

    boy2000 Guest

    Thank you a bundle.
  16. pecheslam

    pecheslam New Member

    Jul 8, 2014
    Likes Received:
    Trophy Points:
    Home Page:
    Tried to get but links are down, Anychance of new links?
  17. roberth73

    roberth73 Guest

    THANK YOU:heyo:
  18. Computaz

    Computaz Guest

    All links now dead :24:
  19. ivan11

    ivan11 Guest

    links dead!! :cray:

Share This Page